EPDM Flat Roof Replacement
EPDM membrane does not contain organic material that can decay as the result of moisture caused by condensation or leaks. EPDM membrane, due to its ability to withstand extreme temperature, can be successfully used in assemblies with greater thermal resistance (thicker insulations with higher R-values).
EPDM Commercial Roofing Installation
EPDM Offers Many Benefits for Flat Roof Replacement
- EPDM has superior resistance to UV (ultraviolet) radiation
- EPDM has unmatched resistance to thermal shock
- EPDM exhibits superior resistance to cyclic fatigue
- EPDM has superior resistance to hail damage
- EPDM will not become brittle and will not shatter due to low temperature flexibility
Watch the video about The Benefits of EPDM Roofing.
We Install Commercial Flat Roofs, Sheet Metal Coping and Parapet Walls
EPDM Roof Costs for Minnesota
The total cost for an average EPDM roof is between $11 and $16 per square foot. A typical assembly includes tear off and disposal off site, some insulation and the EPDM membrane. There are three ways to attach it to the flat roof: Mechanically attach it with screws and plates; Fully adhered with an adhesive; or Ballasted with river rock or pavers to the substrate. The perimeter is then secured by reusing the existing perimeter sheet metal or replaced with new sheet metal if needed. The seams are glued together with adhesive or adhered together using pressure sensitive tape and primer.
These prices would not include insulation to code. For example, if the R-value for a typical home is R-38, the requirement would be more than 6 inches of insulation. Most structures in Minnesota already have some insulation, so the price would be based, on the additional insulation required.
These prices fluctuate in terms of size and difficulty, and may cost more than noted above. Very small and difficult projects are more expensive, due to greater labor and possibly added material costs. With any of these membranes, more penetrations add to the difficulty and to the final cost. The cost is dependent on the amount of detail work required.
Give us a call for a quote.
Most Popular FAQ’s
What Is EPDM Roofing?
EPDM (Ethylene Propylene Diene Monomer) roofing is a type of single-ply rubber roofing membrane that is widely used for commercial buildings. It is known for its durability, weather resistance, and flexibility, making it a popular choice for flat roofs. EPDM is lightweight, easy to install, and offers excellent resistance against UV radiation, temperature extremes, and weather damage.
Which are the major EPDM roof serviceable areas?
We provide EPDM roofing services throughout Minnesota, including major cities and regions such as Minneapolis, Saint Paul, Rochester, Duluth, and surrounding areas. Rubber Roofing MN serves the entire state with professional EPDM roof installations, repairs, and maintenance services.
How Much is the cost of EPDM roof installation?
The cost of installing an EPDM roof can vary depending on the size of the building and specific project requirements. On average, the cost ranges from $6 to $12 per square foot. To get an accurate estimate for your EPDM roofing project, we recommend contacting us for a personalized consultation.
How much does an EPDM roof inspection cost?
The cost of an EPDM roof inspection can depend on the size of the roof and the level of detail required for the inspection. Typically, roof inspections range from $200 to $500. We offer detailed inspection services to help identify any potential issues and recommend appropriate maintenance or repair solutions.
What is the cost of an EPDM roof replacement?
The cost of replacing an EPDM roof depends on the size of the commercial building, the complexity of the project, and any preparatory work needed before replacement. Typically, EPDM roof replacement costs range from $7 to $15 per square foot. Please reach out to Rubber Roofing MN to schedule an inspection and receive a customized quote for your roof replacement.